Outdoor wall washing lamp wiring needs to follow certain rules and standards to ensure safety and reliability. The following are the general steps for wiring outdoor wall washing lights:

Determine the location of the power supply and controller: Firstly, it is necessary to determine the location of the power supply and controller. A location closer to the outdoor wall washing lamp should be selected to reduce the length of the circuit and voltage drop.

Install power supply and controller: Install the power supply and controller according to actual needs.

Wiring: First, connect the power cord between the power supply and the controller, and then connect the signal wire between the controller and the outdoor wall washing lamp. When wiring, it should be ensured that each wire has a label to avoid reverse connection.

Testing: After the wiring is completed, it is necessary to test the wiring to ensure that the power supply and controller are working properly, and to control the switch, brightness, and color of outdoor wall washing lights.

Install the lamp: Finally, install the lamp in the required position and connect the power and signal wires to the lamp.

It should be noted that when wiring, it is necessary to follow relevant safety regulations, use wires and plugs that meet standards, and ensure that the wiring is firm and reliable to prevent safety issues such as short circuits and leakage of the wires. At the same time, in order to facilitate maintenance and repair, equipment such as switches and fuses should be installed in appropriate positions.